G-Floor 8.5' x 22' Midnight Black Garage and Utility Flooring - Diamond Tread

G-Floor® Roll-out Flooring is the signature line of high-quality vinyl flooring designed for easy installation and maintenance. Diamond Tread is perfect for both residential and commercial applications. The Diamond Tread texture has raised diamonds that provide excellent slip resistance and traction. The Diamond Tread pattern is a great choice for use in a shop or garage where you want the rugged industrial look.

G-Floor is made in the USA from a single-piece construction so there are no weak points for long-lasting beauty and protection. This waterproof flooring can be used to cover stained floors or to prevent future damage. Easy to install, just roll out and then pull the flooring over itself into position. You can fluff it like you would a bed sheet, slightly lifting the flooring to introduce air underneath it to help position it into your desired location. Trim with a straight edge and utility knife, if needed. No adhesive is necessary.

Mats can be joined together for a full wall to wall installation. Once installed, your G-Floor adds the perfect layer of protection against everyday accidents. Preventing concrete deterioration and contamination, the flooring is resistant to common chemicals, so you no longer have to worry about oil leaks or road salt. Just quickly wipe up with a damp mop, mild detergent or vinyl floor cleaner for a deeper clean. G-Floor Roll-out Flooring will provide years of protection and look good doing it.

What is the thickness of the flooring?

The Diamond Tread flooring has a base thickness of 75 Mil and an overall thickness of 130 Mil. The Diamond Tread pattern is made up of raised diamonds that are 1.125” in length with a 0.055” relief, spaced 0.625” apart.

How do I prepare the floor before installation?

The floor must be clean, dry, and completely free of debris. It should also be level and free of any major cracks or defects.

Can I use double-sided tape with a G-Floor® installation?

Double sided tape should only be used on the leading edge of the mat, at the entrance of the garage, if needed. Most of the time, the parking pad is heavy enough and tape is not needed. We do not recommend using double sided tape around the perimeter of any parking pad, as it can cause the center of the mat to buckle.