Piczel Video Temperature Alert 

by Piczel | Item  #: 244346 | Model #:  2600 |
Piczel Video Temperature Alert
We're sorry, this item is not available in your selected Club.  Check another Club

About this item

  • Insert between camera and DVR channel to add temperature display to video
  • Alarm activates when temperature is a problem and triggers e-mail function of your DVR
  • Monitor your home, vacation home, office, or anything at your business
  • User menus to set display and alarm parameters.
  • Description

    Peace of mind while you are away
    The Piczel Video Temp Alert adds the temperature of a monitored area to the video of a CCTV camera. When used with a newer model DVR (like the Piczel 5208, 5216, or 5190) you can see the current temperature of your home, vacation home, office, or specific equipment at your business from a PC or Smartphone. Walk in refrigerators and freezers can also be monitored with the included temperature probe. The area where the temperature is being monitored does not have to be associated with what the camera is viewing, in effect, adding another channel to your DVR system. No need to wait for an alarm, you can see what the current temperature is whenever you wish.

    Receive an alert when there is a problem
    The Video Temp Alert will trigger a normally open or normally closed alarm contact on a properly equipped DVR (like the models listed above) and send you an e-mail or text message alert when there is a problem. Simply set the high and low temperatures you determine in one of the user friendly menus. The alarm contact will trigger whenever the temperature rises above, or falls below your settings.

    Works with any standard CCTV system
    A typical installation is to place the unit between a camera and a channel input on an internet ready DVR. The Video Temp Alert can be located near the camera, or close to the DVR. All that is necessary is that you loop the video through the BNC connectors on the unit (a BNC-BNC patch cable is also included in the box), and plug the 12VDC power adapter into an AC outlet. A temperature sensor at the end of a 10' cable is included and normally installed in the room, refrigerator, freezer, or area that falls within the operational range of the included probe (0° F ~ 180° F). The length of temperature probe can be extended to reach areas further away from the unit, or cut shorter if desired. The three switches on the front panel guide you through the menus and settings which include: High Temp Value, Low Temp Value, Deg C / Deg F, Alarm Output NC/NO, Move Temp Display on Screen, Screen Saver Mode (temp display moves on screen arbitrarily), and Calibration Mode (adjusts for any differences caused by extending the temperature probe wiring, or to match the readings of other devices being used).

    Plug-N-Play installation with lifetime customer support
    All Piczel products are packaged with everything you need to connect and operate them with no special tools required. Professional style locking BNC connectors are used on all video products for long term stability, and compatibility with cameras and accessories made by other major CCTV manufacturers. Toll free (USA based) lifetime customer support with technicians also available to remotely connect to your system (with your authorization) and help you configure your connection to the internet!


    Product Specifications
    Cable Type:BNC-BNC patch cable included.
    Connection TypeBNC
    Cable Length:3'
    Number of Cables:1
    Min Environmental Temp for included probe:0° F
    Max Environmental Temp for included probe:180° F
    Max Environmental Temp for Control Unit Operation:122° F
    Temperature probe length:10' (Can be cut shorter or added to)
    Controls:3 momentary switches
    Alarm output:Normally Closed or Normally Open
    Alarm Contacts:TTL (0-5V / 50ma max)
    Temperature Alarm:Any value outside of user programmed range
    Calibration:Adjustable + or 1 by degree
    Screen display:Static - adjustable screen position, or screen saver (animated -moving) modes
    Case size:2.75" W x 5"L x 1"H
    Technical Support
    Phone Number:1-800-774-0284
    Hours of Availability:8:00AM - 9:00PM M-F & 10:00AM - 4:00PM Sat. Eastern Time Zone
    Web Support URL:www.piczel.com
    Package Contents
    Video Temp Alarm control unit
    10' temperature probe assembly
    12 VDC power supply
    Owner's manual CD
    Mounting clips and screws for temperature probe

    Assembled Country


    Assembled Size

  • 2.75" W x 5"L x 1"H
  • 0.5 lbs.
  • Component Country




    Member reviews & questions

    Ask & Answer

    Policies & plans

    Shipping Information

    Standard - 2 to 6 business days

    Premium - 2 to 4 business days

    Express - 1 to 2 business days

    Warranty Information

    1 year limited manufacturer's warranty.

    Televisions, laptop and desktop computers, projectors, digital music players, cameras, camcorders, and other electronics must be returned within ninety (90) days.

    You're in!

    Your online account has been created.
    Start saving today