Auto Dry uses thermostats to monitor air temperature and reduce fabric wear\n
Dimensions: 27\"W x 251/2\"D x 42\"H
Disconnecting existing electric dryer
Installing the new electric dryer in the same location
Verifying that the new unit is fully functional
Be sure to have the necessary installation accessories (i.e. water lines, power cords, vents) available for the delivery person.
Federal, State, and Local codes prevent the reuse of existing installation accessories.
Inspect your new appliance for damage; the delivery person will explain your options if damage is discovered.
Verify that your new appliance has been tested and is operational before signing the Proof of Delivery.
Professional installation of your new electric dryer is included with delivery provided the following conditions exist. Unless ALL conditions listed here exist, the installer will be unable to perform the installation.
Please have your home ready for your new appliance.
There must be a dedicated 220/240-volt three or four prong grounded electrical outlet, protected by a 40 amp circuit breaker or time delay fuse.
A new dryer cord and dryer duct must be purchased prior to installation (used accessories cannot be re-used for safety reasons; delivery agents are prohibited from using an old cord or flexible ducting on the new appliance).
The space for the new dryer must be at least 34"D x 28"W; allow at least 24" of space for the dryer door to open.
The construction of the existing exhaust duct, must be 4" in diameter, made of rigid or flexible metal (no plastic) and vented to outside the home (location of the exhaust vent in the wall is located at the back of the dryer).
1 full year limited on parts and labor
GE is responsible for providing warranty service for this product. For
complete warranty details refer to the GE Warranty Guide with the product or call the General Electric Company at 1-800-626-2000.
Orders need to be cancelled a minimum of three business days prior to the scheduled delivery date. Orders cancelled after that time are subject to a $35 restocking fee.
GE or Hotpoint appliances purchased online from Sam's Club and delivered by GE Home Delivery may be returned or replaced if the Member discovers the product is damaged or does not work properly and contacts GE within two business days. Sam's Club Members must contact GE directly at 1-877-885-2787 within 48 business hours of delivery in order to be eligible for returning or replacing the original appliance.
Please inspect your delivery before signing your receipt.
GE appliances must be ordered a minimum of 4 business days in advance of delivery
Delivery service will call to set up appointment
Delivery is not available to AK, HI, Puerto Rico & certain US zip codes