Screw Holder keeps screw in place for easy driving
Allows for easy loading of the next screw
6-bit cartridge lives in the tool, so you won’t lose bits
Easy slide-action advances the next bit into place
Efficient 4V MaxLithium battery holds charge for up to 18 months
About this item
You'll stop dropping screws when you use the highly-reviewed WORX SemiAutomatic Driver w/ Screw Holder. Insert the screw, drive it, and the holder opens to accept the next screw. No more fumbling holding the screw in place. And it removes screws in the same fashion—the holder grabs the screw as you back it out. Now that we’ve solved the dropped screw problem, let’s solve the dropped bits problem, too. The SD Driver houses your favorite 6 bits right in the body of the tool. Just slide the top and it cocks the next bit into place. Drill a pilot hole, drive a Phillips head, drill a pilot hole, drive a flat head, all without grabbing a different bit from your pocket. You’ll be the fastest draw on the job. The on/off trigger acts as a variable speed control switch, so you can increase the speed of the rotation depending on the task. The onboard battery recharges in about 5 hours when used with the included charger. And that battery will hold a charge for 18 months. It’s a lightweight tool, so you can use it for hours without hand or arm fatigue. The onboard LED light lets you see when you’re working in dark places. And the overall slim design lets you get into tight spaces with just one hand and still get the job done. No more dangerously balancing on a ladder while you use both hands to hold the screw in place and drive it. Just calmly raise one hand and get in there.
Switch bits in seconds
Compatible with any 1/4” bit
Reloadable cartridge comes with 6 of the most commonly used bits
Screw Holder prevents dropped screws
Ergonomic design is easy and comfortable to use for long periods