The Aruba All-Seats Therapy Spa
Sit back and relax in the warm, soothing waters of a spa.
FREE SHIPPING
• 37 Jets
• Seating for 6
• Charcoal Gray Cabinet
Description
Throughout the ages, warm water immersion has been proven to restore the mind, body and spirit.
Watch as your aches and pains disappear, your sleeping cycles improve, and the tension in your
joints, hands, and feet vanish with our Aruba Spa. The Aruba is made by one of the world’s Best
of Class 5-Star Rated spa builders. We use only top of the line products to achieve optimum
performance with little to no maintenance. This 5 - 6 person spa is the perfect addition to any
backyard or sunroom. There are 37 adjustable and interchangeable stainless steel faced jets to
maximize your therapeutic experience. The jetting system is powered by a high-flow, Ultra-ssage
jet pump. You can increase or decrease the water flow to any particular jet for a more
personalized hydrotherapy experience and a cascading waterfall adds even a more tranquil
ambiance.
The spa is handmade to your individual specifications. We only use Lucite crosslink acrylic
with Microban. Microban is an anti-bacterial compound incorporated into the shell of the spa,
preventing bacteria growth. This allows for a non-slip, non-corrosive surface that actually
aides in the cleanliness of the spa. Couple this with our Q-Zone ozonator, a system that
oxidizes the water to kill bacteria, so chemical maintenance is drastically reduced, saving you
time and money. All of our spas are fully enclosed and fully insulated with closed-cell
polyurethane foam to guarantee the best heating results possible.
The spa comes in a Platinum White (marble finish) acrylic color with charcoal gray synthetic,
maintenance-free side paneling. A locking virgin foam cover matching the side paneling comes
standard with purchase. Also included is a complete three-month, all-natural Eco-one chemical
kit and hose filter attachment. The filter allows for the best possible water when filling the
spa. The kit maintains chemical levels without the harsh, abrasive use chlorine.
Once you have placed your order and Sam's club has processed it, a spa representative will call you to go over the power requirements, shipping and color options. You will also receive a welcome letter, a check list to help insure you are ready for a spa and color options via email. Question on this can also be answered via email or the toll free number listed here.
Specifications
- 37 adjustable, stainless-steel faced jets
- Adjustable waterfall feature
- Color matched, virgin foam lockable cover included
- Seats 6 adults
- Lucite crosslink acrylic with Microban (Platinum White)
- Maintenance-free synthetic side paneling (Charcoal Gray)
- LED foot-well light
- One 3HP 210GPM Executive 56-jet pump
- Balboa Control Panel
- Fully-insulated with closed-cell polyurethane spray foam
- 4.0kw Balboa heater
- Ozone sanitation system
- Product dimensions: 76" x 81" x 37"
- Curbside delivery included
Electrical Requirements:
All 240V spas must be permanently connected (hard wired) to the power supply; supplying power to the spa which is not in accordance with these instructions will void the manufacturer's warranty. The power supplied to the spa must be a dedicated circuit with no other appliances or lights sharing the power.
Wire size must be appropriate per NEC and/or local codes. Wire size is determined by length of run from breaker box to spa and maximum current draw. All wiring must be copper to ensure adequate connections. Do not use aluminum wire. The electrical supply for the spa must include a suitably rated switch or circuit breaker to open all ungrounded supply conductors to comply with Section 422-20 of the National Electric Code, ANSI/NFPA 70. The disconnecting means must be readily accessible to the spa's occupant, but installed at least 5 feet (1.5 m) from the spa water. The electrical circuit for the spa must include a suitable ground fault circuit interrupter (GFCI) as required by NEC Article 680-42. Instructions for wiring the spa are included in the spa pack on delivery. Conduit can be placed anywhere along the spa kick plate for a clean look and easy installation - attach/drill a hole for the conduit, run wires through hollow bottom of spa. Final connections can be found on the control panel side of the spa. Remove side panels to uncover final connections. A licensed electrical contractor recommended for installation.Shipping Information:
This item ships to the 48 contiguous states only via curbside delivery. Final placement from the curb to the back yard is your responsibility. We recommend you hire a local mover for final placement. Electrical requirements & flat level foundation for placement are the member's responsibility. Estimated delivery time is 4 to 6 weeks. Delivered is by appointment only.
Details
Assembled Country
USA
Assembled Size
76" x 81" x 37"
Component Country
USA
Shipping Information
Warranty Information
15 years - Structure7 years - Acrylic Finish
4 years - Parts
1 year - Labor
There is no additional information available for this item.
