About this item
• 23 Jet
• Seating for 4 - 5
The Rotunda is made by one of the world’s Best of Class 5-Star Rated spa builders. We use only top of the line products to achieve optimum performance with little to no maintenance.
This 4 - 5 person all seats spa is the perfect addition to any backyard or sunroom. There are 23 adjustable and interchangeable stainless steel faced jets to maximize your therapeutic experience. The jetting system is powered by 1 two speed Ultra-ssage jet pumps. You can increase or decrease the water flow to any particular jet for a more personalized hydrotherapy experience.
The Rotunda comes ozone ready, meaning for an additional charge we will add a Q-Zone ozonator that will oxidize the water killing bacteria and mold and reducing your chemical costs.It comes standard with a multi-colored LED footwell light (changeable with the press of a button) for a more relaxing and enjoyable spa experience. The spa is capable of using 110v or 220v power (both hardwired, required 220v if ozonator purchased).
The spa is handmade to your individual specifications. A locking virgin foam cover matching the side paneling comes standard with purchase. Contact us for a full list of color options. Also included is a complete 3 month all natural Ecoone chemical kit and hose filter attachment. The filter allows for the best possible water when filling the spa and the kit maintains chemical levels without the harsh abrasive use chlorine.
Sit back and relax in the warm soothing waters of a spa. Throughout the ages warm water immersion has been proven to restore the mind, body, and spirit. Watch as your aches and pains disappear, your sleeping cycles improve, and the tension in your joints, hands, and feet vanish with our Rotunda Spa.
Once you have placed your order and Sam's club has processed it, a spa representative will call you to go over the power requirements, shipping and color options. You will also receive a welcome letter, a check list to help insure you are ready for a spa and color options via email. Question on this can also be answered via email or the toll free number listed here.
Let our 30 plus years of building spas work for you!
Call us toll free at 1-877-263-8585 with any questions.
For more details and pictures e-mail us at firstname.lastname@example.org
- Seats 4-5 Adults
- 5 Seats
- 23 Adjustable Stainless Steel Faced Jets
- 1 - 2HP 210GPM Pump
- 3.8 Heater
- Gecko Control Panel
- Fully Insulated with Closed Cell Polyurethane Spray Foam
- Virgin Foam Color Matching Lockable Cover Included
- Curb Side Delivery Included
All 240V spas must be permanently connected (hard wired) to the power supply; supplying power to the spa which is not in accordance with these instructions will void the manufacturer's warranty. The power supplied to the spa must be a dedicated circuit with no other appliances or lights sharing the power.
Wire size must be appropriate per NEC and/or local codes. Wire size is determined by length of run from breaker box to spa and maximum current draw. All wiring must be copper to ensure adequate connections. Do not use aluminum wire. The electrical supply for the spa must include a suitably rated switch or circuit breaker to open all ungrounded supply conductors to comply with Section 422-20 of the National Electric Code, ANSI/NFPA 70. The disconnecting means must be readily accessible to the spa's occupant, but installed at least 5 feet (1.5 m) from the spa water. The electrical circuit for the spa must include a suitable ground fault circuit interrupter (GFCI) as required by NEC Article 680-42. Instructions for wiring the spa are included in the spa pack on delivery. Conduit can be placed anywhere along the spa kick plate for a clean look and easy installation - attach/drill a hole for the conduit, run wires through hollow bottom of spa. Final connections can be found on the control panel side of the spa. Remove side panels to uncover final connections. A licensed electrical contractor recommended for installation.Shipping Information:
This item ships to the 48 contiguous states only via curbside delivery. Final placement from the curb to the back yard is your responsibility. We recommend you hire a local mover for final placement. Electrical requirements & flat level foundation for placement are the member's responsibility. Estimated delivery time is 4 to 6 weeks. Delivered is by appointment only.
Dimensions: Round 78’’ x 35’’H