BlockTile - Interlocking Garage Floor Edges with Loops - Black - 12 Edges and 2 Corners
- $ 17 64 17.64
- Enter ZIP Code for shipping options
- Estimated arrival
There are two types of ramp edges for BLOCKTILE loop-to-peg interlocking floor tiles: “Ramp Edges with Loops” and “Ramp Edges NO Loops.” The names refer to the loops on the long side of the ramp edge. Because the tiles are modular in nature, you have the option to select either type of edge for your installation. There is no right or wrong decision. However, depending on how you start your installation and the type of room in which you are installing the interlocking floor tiles, you may want to consider selecting one versus the other.
If you are installing the interlocking floor in a garage, the answer depends on whether you begin the installation at the entrance of the garage or at the back.
Option 1: Installation Starting at the Entrance of Garage - For installations that begin at the garage entrance, the “Ramp Edges with Loops” will be needed. This is because the floor tiles should be oriented so that the loops are pointing toward the back of the garage and the opposite corner from where you are beginning. By orienting the tiles toward the back of the garage and toward the opposite corner from where you are beginning the installation, you assure yourself that you will need ramp edges with loops. The added benefit of aligning the tiles this way is an easier installation. Remember, two sides of the tiles have loops and the other two sides do not.
Option 2: Installation Starting at the Back of Garage - This option is not recommended unless your garage is a small one car garage. For installations that begin at a corner in the back of the garage, the floor tiles should be oriented with the loops pointing toward the garage entrance and the opposite corner from where you are beginning. Hence, you will need the “Ramp Edges with NO Loops.”
Option 3: Garage Floor Mat - If you will are creating a mat, you will need both types of ramp edges plus corners. As an example, consider that your garage floor mat will be 20 feet by 22 feet. In this example, you will need 20 + 22 = 42 of one type of ramp edge and an equal amount of the other type of edge. Of course, you will also need 4 ramp corners. When buying the edges, which are sold in boxes of 12 edges and two corners, you would need 4 boxes of each type of ramp edges (you will have some extra edges/corners). Just remember that two adjacent sides of the garage floor mat will have loops and the other two sides will NOT have loops.
BLOCKTILE ramp edges may only be used with BLOCKTILE interlocking floor tiles. They will not interlock with any other brands. Due to differences resulting from various digital devices, please note that colors represented on your monitor may differ slightly from the actual interlocking floor tiles. For questions or concerns regarding this product, please contact the Manufacturer's Customer Service Department at 1.877.595.2040.
|Product Type:||Interlocking Garage Floor Edges with Loops|
|Quantity:||12 Edges and 2 Corners|
|Surface:||No-slip coin pattern/UV resistant|
|Dimensions:||12”L x 2 1/2”W x 1/2”H - ramped|
|Installation:||Loop-to-peg interlocking system|
|Capacity:||Built to handle high rollover loads from large vehicles or tool chests|
|Usage:||Garage floors, gym floors, etc.|
Ask & Answer
Warranty Information1 Year manufacturer's limited warranty. This warranty does not cover the product damaged by un-recommended or unreasonable use or exposure, intentional damage, negligence, improper installation or modification.
There is no additional information available for this item.